max_y_word is 3.746020
issuing G38.3 Y 3.7460
queue 0
issuing MDI command: G38.3 Y3.7460
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +164,G38.3\032Y3.7460,)
Issuing EMC_TRAJ_CLEAR_PROBE_TRIPPED_FLAG -- 	 (+228,+12,    +0,)
Issuing EMC_TRAJ_PROBE -- 	 (+229,+116,    +0,6.704403,-0.010019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +5,0.166667,2.250000,15.000000,\001,)
waiting for status.probing - i = 0
waiting for probe trip - i = 0
waiting for probe trip - i = 1
waiting for probe trip - i = 2
LinuxCNC interp_state change was INTERP_IDLE is now INTERP_READING
waiting for probe trip - i = 3
waiting for probe trip - i = 4
waiting for probe trip - i = 5
waiting for probe trip - i = 6
waiting for probe trip - i = 7
waiting for probe trip - i = 8
waiting for probe trip - i = 9
Issuing EMC_TASK_PLAN_SYNCH -- 	 (+516,+12,    +0,)
mdi_execute_hook: MDI command 'G38.3 Y3.7460' done (remaining: 0)
issuing G0 Y -0.2997
queue 0
issuing MDI command: G0 Y-0.2997
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +165,G0\032Y-0.2997,)
Issuing EMC_TRAJ_LINEAR_MOVE -- 	 (+220,+120,    +0,6.704403,-4.055719,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +1,2.250000,2.250000,15.000000,    +0,    -1,)
mdi_execute_hook: MDI command 'G0 Y-0.2997' done (remaining: 0)
LinuxCNC interp_state change was INTERP_READING is now INTERP_IDLE
issuing MDI command: G0 X -0.5 Y -0.5
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +166,G0\032X\032-0.5\032Y\032-0.5,)
Issuing EMC_TRAJ_LINEAR_MOVE -- 	 (+220,+120,    +0,5.454403,-4.256019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +1,2.278703,2.278703,15.191356,    +0,    -1,)
LinuxCNC interp_state change was INTERP_IDLE is now INTERP_READING
mdi_execute_hook: MDI command 'G0 X -0.5 Y -0.5' done (remaining: 0)
LinuxCNC interp_state change was INTERP_READING is now INTERP_IDLE
max_x_word is 8.035597
max_y_word is 3.746020
issuing G0 Y 0.2500
queue 0
issuing MDI command: G0 Y0.2500
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +167,G0\032Y0.2500,)
Issuing EMC_TRAJ_LINEAR_MOVE -- 	 (+220,+120,    +0,5.454403,-3.506019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +1,2.250000,2.250000,15.000000,    +0,    -1,)
issuing G38.3 x 8.0356
queue 0
issuing MDI command: G38.3 x8.0356
MDI: queueing 'G38.3 x8.0356' (queue len=1)
waiting for status.probing - i = 0
waiting for status.probing - i = 1
LinuxCNC interp_state change was INTERP_IDLE is now INTERP_READING
waiting for status.probing - i = 2
waiting for status.probing - i = 3
waiting for status.probing - i = 4
waiting for status.probing - i = 5
mdi_execute_hook: MDI command 'G0 Y0.2500' done (remaining: 1)
waiting for status.probing - i = 6
emcTaskPlan: MDI: dequeueing 'G38.3 x8.0356' (remaining: 0)
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +168,G38.3\032x8.0356,)
Issuing EMC_TRAJ_CLEAR_PROBE_TRIPPED_FLAG -- 	 (+228,+12,    +0,)
Issuing EMC_TRAJ_PROBE -- 	 (+229,+116,    +0,13.990003,-3.506019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +5,0.166667,2.250000,15.000000,\001,)
waiting for probe trip - i = 0
waiting for probe trip - i = 1
Issuing EMC_TASK_PLAN_SYNCH -- 	 (+516,+12,    +0,)
mdi_execute_hook: MDI command 'G38.3 x8.0356' done (remaining: 0)
LinuxCNC interp_state change was INTERP_READING is now INTERP_IDLE
 queue 0
issuing MDI command: G10 L2 P1 X5.954483532342
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +169,G10\032L2\032P1\032X5.954483532342,)
Issuing EMC_TRAJ_SET_G5X -- 	 (+224,+88,    +0,    +1,5.954484,-3.756019,-4.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,)
Issuing EMC_TRAJ_SET_ROTATION -- 	 (+226,+20,    +0,0.000000,)
mdi_execute_hook: MDI command 'G10 L2 P1 X5.954483532342' done (remaining: 0)
issuing G0 X -0.5000
queue 0
issuing MDI command: G0 X-0.5000
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +170,G0\032X-0.5000,)
Issuing EMC_TRAJ_LINEAR_MOVE -- 	 (+220,+120,    +0,5.454484,-3.506019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +1,2.250000,2.250000,15.000000,    +0,    -1,)
issuing G0 Y -0.5000
queue 0
issuing MDI command: G0 Y-0.5000
MDI: queueing 'G0 Y-0.5000' (queue len=1)
issuing G0 X 0.7500
queue 1
LinuxCNC interp_state change was INTERP_IDLE is now INTERP_READING
mdi_execute_hook: MDI command 'G0 X-0.5000' done (remaining: 1)
emcTaskPlan: MDI: dequeueing 'G0 Y-0.5000' (remaining: 0)
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +171,G0\032Y-0.5000,)
Issuing EMC_TRAJ_LINEAR_MOVE -- 	 (+220,+120,    +0,5.454484,-4.256019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +1,2.250000,2.250000,15.000000,    +0,    -1,)
issuing MDI command: G0 X0.7500
MDI: queueing 'G0 Y-0.5000' (queue len=1)
issuing G38.3 Y 3.7460
queue 1
mdi_execute_hook: MDI command 'G0 Y-0.5000' done (remaining: 1)
emcTaskPlan: MDI: dequeueing 'G0 X0.7500' (remaining: 0)
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +172,G0\032X0.7500,)
Issuing EMC_TRAJ_LINEAR_MOVE -- 	 (+220,+120,    +0,6.704484,-4.256019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +1,2.250000,2.250000,15.000000,    +0,    -1,)
issuing MDI command: G38.3 Y3.7460
MDI: queueing 'G0 X0.7500' (queue len=1)
waiting for status.probing - i = 0
waiting for status.probing - i = 1
waiting for status.probing - i = 2
waiting for status.probing - i = 3
waiting for status.probing - i = 4
waiting for status.probing - i = 5
waiting for status.probing - i = 6
waiting for status.probing - i = 7
mdi_execute_hook: MDI command 'G0 X0.7500' done (remaining: 1)
emcTaskPlan: MDI: dequeueing 'G38.3 Y3.7460' (remaining: 0)
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +173,G38.3\032Y3.7460,)
Issuing EMC_TRAJ_CLEAR_PROBE_TRIPPED_FLAG -- 	 (+228,+12,    +0,)
Issuing EMC_TRAJ_PROBE -- 	 (+229,+116,    +0,6.704484,-0.010019,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +5,0.166667,2.250000,15.000000,\001,)
waiting for probe trip - i = 0
Issuing EMC_TASK_PLAN_SYNCH -- 	 (+516,+12,    +0,)
mdi_execute_hook: MDI command 'G38.3 Y3.7460' done (remaining: 0)
LinuxCNC interp_state change was INTERP_READING is now INTERP_IDLE
 queue 0
issuing MDI command: G10 L2 P1 Y-3.755605000774
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +174,G10\032L2\032P1\032Y-3.755605000774,)
Issuing EMC_TRAJ_SET_G5X -- 	 (+224,+88,    +0,    +1,5.954484,-3.755605,-4.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,)
Issuing EMC_TRAJ_SET_ROTATION -- 	 (+226,+20,    +0,0.000000,)
mdi_execute_hook: MDI command 'G10 L2 P1 Y-3.755605000774' done (remaining: 0)
issuing G0 Y -0.5000
queue 0
issuing MDI command: G0 Y-0.5000
Issuing EMC_TASK_PLAN_EXECUTE -- 	 (+520,+268,  +175,G0\032Y-0.5000,)
Issuing EMC_TRAJ_LINEAR_MOVE -- 	 (+220,+120,    +0,6.704484,-4.255605,-2.366242,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,    +1,2.250000,2.250000,15.000000,    +0,    -1,)
LinuxCNC interp_state change was INTERP_IDLE is now INTERP_READING
mdi_execute_hook: MDI command 'G0 Y-0.5000' done (remaining: 0)
LinuxCNC interp_state change was INTERP_READING is now INTERP_IDLE